Advance to Supplier

Advance to Supplier is money you pay a vendor before you receive their bill. In LocalizeBook you record it as a Payment (VDP) on the Other Charge tab using an account of type Advance to Supplier, then use it on the Purchase (Bill)'s Set Credit tab.

Last updated: Nov 17, 2026

What is an Advance to Supplier?

An Advance to Supplier is money you pay a vendor before you receive and record their bill — for example, a 50% deposit on a purchase order, a down payment so the supplier starts production, or full payment in advance for goods that will arrive later. It is also called a vendor advance, supplier deposit, prepayment, or down payment to a supplier.

Until the goods or services arrive and you record the bill, the advance is not an expense or inventory yet. It is money the vendor owes you (goods, a service, or a refund), so LocalizeBook keeps it in an asset account of type Advance to Supplier (for example, 132100 - Advance to Supplier). The advance stays open for that vendor until a bill uses it.

In LocalizeBook there is no separate "Advance to Supplier" form. You record an Advance to Supplier with a Payment (VDP) and put the amount on the Other Charge tab.

When should I use Advance to Supplier?

Use Advance to Supplier when you pay the vendor before you receive their bill:

  1. The vendor confirms a Purchase Order and asks for a deposit before delivering.
  2. You pay the full amount now, but the goods and the bill come later.
  3. You pay a booking or reservation deposit to a supplier.

Use something else when:

Situation

Use this instead

You already recorded the vendor's bill and you are paying it

Payment (VDP) — tick the bill on the Payment Detail tab

You pay on the spot and there is no bill (for example, a small cash purchase)

Cash Expense (EXP)

You return goods to the vendor

Purchase Return (PRT)

Where it fits in the purchase flow: Vendor → Purchase Order (optional) → Advance to Supplier (paying in advance) → Goods Received (optional) → Purchase (Bill) → Payment.

Before you start

Check that your Chart of Accounts has an account of type Advance to Supplier (go to Accounting > Chart of Accounts). For example, 132100 - Advance to Supplier. If you don't have one, you can add it from the Account dropdown with + Add.

Only an account of type Advance to Supplier (or Account Payable) creates a credit you can use later on the bill. Do not use similar-looking "Other Current Asset" accounts such as Prepayment, Cash Advance, or Advance Cash for Operation for a supplier advance.

How to record an Advance to Supplier

Open a new Payment in one of these ways:

  1. Go to Vendor > Vendor Transaction, click Add, and choose Payment (VDP). Keyboard shortcut: Alt + M.
  2. Or on the Home page, under How LocalizeBook works, open 1 · Buy from vendors, click the info icon on Advance to Supplier (Paying in advance?), and click New Payment.

Fill in the Payment:

  1. Vendor — select the vendor you are paying.
  2. Date — the date you paid.
  3. Payment Method — how you paid (for example, 1-Cash).
  4. Account — the cash or bank account the money comes from (for example, 111101 - Cash in Bank or 111500 - Cash on Hand).
  5. Currency, Cheque To, Cheque No, Reference, and Memo — fill in as needed. Use Reference for the vendor's quotation, proforma invoice, or PO number. The Number (for example, PV-2026-11-0002) is filled automatically.
  6. Open the Other Charge tab. Do not tick anything on the Payment Detail tab — there is no bill yet.
  7. In the Other Charge line, enter:
  8. Memo — what the advance is for, for example "50% advance for Purchase Order PO-0008".
  9. Amount — the advance amount.
  10. Account — choose 132100 - Advance to Supplier (or another account of type Advance to Supplier).
  11. Tax — leave as NA unless you need a tax on this line.
  12. Click the save icon at the end of the line to add it. Amount Paid, Other Charge, and Grand Total update to the advance amount automatically.
  13. Click Save & Close (or Save & New to record another one).

How to use an Advance to Supplier on a bill

When the vendor's bill arrives, apply the advance on the Purchase (Bill)'s Set Credit ($) tab:

  1. Create the Purchase (Bill) for the same vendor (Vendor > Vendor Transaction > Add > Purchase (Bill)) and enter the items or expenses as usual.
  2. Open the Set Credit ($) tab. It lists the vendor's open credits, including Advances to Supplier, with these columns: Tran Type, Tran Date, Number, Grand Total, Open Balance, Discount Account, Discount Amount, Pay Amount, Memo.
  3. Tick the advance you want to use.
  4. Check the Pay Amount. You can use the full advance or only part of it. Any unused part stays open for the next bill.
  5. Click Save & Close.

The bill's open balance is reduced by the advance. Pay the rest later with a normal Payment (VDP).

Example: 50% advance on a $2,000 purchase

  1. You order $2,000 of goods from a supplier and pay a $1,000 advance from the bank. → Create a Payment: Account 111101 - Cash in Bank, Other Charge line $1,000, Account 132100 - Advance to Supplier.
  2. The goods arrive and you record the supplier's $2,000 Purchase (Bill). → On the Set Credit ($) tab, tick the $1,000 advance. The bill open balance becomes $1,000.
  3. You pay the remaining $1,000. → Create a Payment and tick the bill on the Payment Detail tab, Amount Paid $1,000.

Accounting entries for an Advance to Supplier

Step

Debit

Credit

Pay the advance (Payment, Other Charge)

132100 Advance to Supplier

Cash / Bank (Payment Account)

Record the bill (Purchase)

Inventory or Expense (and VAT Input, if taxed)

200000 Accounts Payable

Use the advance (Purchase, Set Credit)

200000 Accounts Payable

132100 Advance to Supplier

Before it is used, the advance shows on the Balance Sheet as a current asset under Advance to Supplier. It is not counted as an expense on the Profit/Loss report until you record the bill.

How to see open Advances to Supplier

  1. Balance Sheet — the Advance to Supplier account (132100) shows the total of all advances not yet used.
  2. Vendor > Vendor Center — select the vendor and open the Transaction tab to see the advance Payment. Set the date to All Date to see older ones.
  3. Purchase (Bill) > Set Credit ($) tab — shows the vendor's advances that are still open and their Open Balance.

Edit, void, or delete an Advance to Supplier

An Advance to Supplier is a Payment, so you manage it the same way: go to Vendor > Vendor Center, select the vendor, open the Transaction tab, click the Payment, then click Edit, Void, or Delete.

  1. Edit — change the advance, then click Save & Close.
  2. Void — cancels the advance but keeps it in the list, shown in red.
  3. Delete — removes it completely.

A Payment that has been bank-reconciled can't be voided or deleted.

Troubleshooting: the advance does not show on the Set Credit tab

  1. Wrong account type — the Other Charge line must use an account of type Advance to Supplier (or Account Payable). Accounts like 133500 - Prepayment or 133100 - Cash Advance are "Other Current Asset" and don't create a credit you can use on the bill. Edit the Payment and change the account.
  2. Different vendor — the bill must be for the same vendor as the advance.
  3. Ticked on Payment Detail instead of Other Charge — an advance must be entered on the Other Charge tab.
  4. Already used — the advance's Open Balance is 0 because an earlier bill used it.
  5. Voided — a voided Payment can't be used.

Frequently asked questions

How do I record a deposit or advance payment to a supplier in LocalizeBook?

Create a Payment (VDP). On the Other Charge tab, enter the amount and choose the account 132100 - Advance to Supplier. When the bill arrives, use it on the Purchase (Bill)'s Set Credit tab.

Is an advance to a supplier an expense?

No. An advance to a supplier is an asset until you receive the goods or services and record the bill. LocalizeBook records it in the Advance to Supplier account, not in expenses.

Can I use one advance on more than one bill?

Yes. Enter a smaller Pay Amount on the Set Credit tab. The unused balance stays open for the next bill.

Do I need a Purchase Order before paying an advance?

No. A Purchase Order is optional. The advance only needs the vendor.

What is the difference between Advance to Supplier and Cash Expense?

Advance to Supplier is money paid before the vendor's bill; the bill comes later and uses the advance. Cash Expense records something you pay for on the spot when there is no bill.

What is the difference between Advance to Supplier and a normal Payment?

Both use the Payment (VDP) form. A normal Payment pays an existing bill (Payment Detail tab). An Advance to Supplier is a Payment with no bill, entered on the Other Charge tab with an Advance to Supplier account.

What is the customer side of Advance to Supplier?

When a customer pays you before you invoice them, use Customer Deposit in the Sales flow.

Related articles

  1. Payment
  2. Purchase
  3. Purchase Order
  4. Purchase Receive
  5. Cash Expense
  6. Customer Deposit


Related Articles